Narendra Dahotre

Professor
University Distinguished Research Professor
Discovery Park C136E
940-369-7678
Narendra.Dahotre@unt.edu
  • Education
    • 1987 - Ph.D., Materials Science & Engineering, Michigan State University
    • 1983 - M.S., Metallurgical Engineering, Michigan State University
    • 1980 - B.S., Metallurgical Engineering, University of Poona, India
  • Research

    Prof. Narendra B. Dahotre of materials science and engineering, established the Laboratory of Laser Aided Additive and Subtractive Manufacturing (LAASM) at the University of North Texas (Denton, Texas). The state-of-the-art research facility houses multiple high-power infrared laser systems. These lasers are specifically designed and configured for efficient, reliable, cost-effective, precise, and efficient additive and subtractive manufacturing processes for advanced materials, including metals, ceramics, composites, etc.

    Research Projects:

    Additive Manufacturing:

    • Laser Surface Nitriding of Ti-alloy Biomaterial for Enhance Corrosion and Wear Performance
    • Laser Surface Modification to Mg alloys
    • Laser Engineered Bioceramic Coatings for Load Bearing Implant Applications
    • Laser Aided Additive Manufacturing of Amorphous Coatings
    • Laser Aided Additive Manufacturing of Corrosion and Wear Resistance Coatings

    Subtractive Manufacturing:

    • Laser Aided Machining of Bone/Hard Tissues
    • Laser Machining of Structural Ceramics
  • Publications

    Books

    Author
    1. “Laser Machining of Advanced Materials”, CRC Press-Taylor Francis Group, New York, February 2011, pp. 236, ISBN: 978-0-415-58562-0.
    2. “Laser Machining and Fabrication of Materials”, Springer, New York, November 2007, pp. 450, ISBN: 978-0-387-72343-3.
    3. “Materials Science in Manufacturing”, Academic/Elsevier, NY, 2006, pp. 628, ISBN: 0-7506-7716-3.

     

    Editor

    Monographs

    1. "Intermetallic and Ceramic Coatings", Marcel Dekker, Inc., New York, January 1999, 504 pp., ISBN: 0-8247-9913-5.
    2. "Lasers in Surface Engineering", ASM International, Materials Park, Ohio, 628 pp., 1998, ISBN:0-87180-665-2.

    Conference Proceedings

    1. “Surfaces and Interfaces in Nanostructured Materials - II”, The Metallurgical Society of AIME, Warrendale, PA, 2006, pp. 143, ISBN:978-0-87339-626-4.
    2. “Materials Science in Manufacturing”, Academic/Elsevier Press, New York, 2006, pp. 628, ISBN: 0-7506-7716-3.
    3. “Surface Engineering in Materials Science III”, The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2005, 358 pp., ISBN:0-87339-590-5.
    4. “Surfaces and Interfaces in Nanostructured Materials”, The Metallurgical Society of AIME, Warrendale, PA, 2004, pp. 398, ISBN:0-87339-566-2.
    5. "Heat Treating and Surface Engineering", ASM International, Materials Park, Ohio, 2003, 603 pp., ISBN: 0-87170-797-7
    6. "Surface Engineering: Coatings and Heat Treatment", ASM International, Materials Park, Ohio, 2003, 730 pp., ISBN:0-87170-781-0.
    7. “Surface Engineering in Materials Science II”, The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2003, 494 pp., ISBN:0-87339-537-9.
    8. "Elevated Temperature Coatings: Science and Technology-IV", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2001, 362 pp., ISBN: 0-87339-489-5.
    9. “Surface Engineering in Materials Science I”, The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2000, 460 pp., ISBN:0-87339-471-2.
    10. "Elevated Temperature Coatings: Science and Technology-III", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 1999, 424 pp., ISBN:0-87339-421-6.
    11. "Elevated Temperature Coatings: Science and Technology-II", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 1996, 457 pp., ISBN:0-87339-313-9.
    12. "Elevated Temperature Coatings: Science and Technology-I", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 1995, 440 pp., ISBN: 0-87339-289-2.

    Book Chapters

    1.  “Laser Surface Hardening”, S. SanthanakrishnanNarendra B. Dahotre, ASM Handbook, Volume 4A, Steel Heat Treating Fundamentals and Processes, Editors: Jon Dossett and George E. Totten, pp. 1-26, American Society for Materials (ASM) International, Materials Park, Ohio, 2013.
    2. “Nanocrystalline Diamond”, Narendra B. Dahotre and P. D. Kichambare, Encyclopedia of Nanoscience and Nanotechnology, Editor: H.S. Nalwa, American Scientific Publishers, Stevenson Ranch, CA, January 2004.
    3. “Laser Surface Texturing”, V.V. Semak and Narendra B. Dahotre, a chapter in the book: Lasers in Surface Engineering, Editor: Narendra B. Dahotre, American Society for Materials (ASM) International, Materials Park, Ohio, p35, ISBN:0-87180-665-2.
    4. “Promise of Lasers: Past and Future in Materials Processing”, Narendra B. Dahotre, a chapter in the book: Lasers in Surface Engineering, Editor: Narendra B. Dahotre, American Society for Materials (ASM) International, Materials Park, Ohio, p13, ISBN:0-87180-665-2.
    5. “Surface Preparation and Properties for Coating Deposition”, Arvind Agarwal and Narendra B. Dahotre, a chapter in the book: Intermetallic and Ceramic Coatings, Editors: Narendra B. Dahotre and T.S. Sudarshan, Marcel Dekker, Inc, New York, Jan. 1999, ISBN: 0-8247-9913-5.

    Reviewed Journal Publications

    Published

    1. “Effect of Laser Surface Melting on Microstructure and Corrosion Behavior of AZ31B Mg Bio-implant”, Tsao-Chang Wu, Yee-Hsien Ho, Sameehan S. Joshi, Ravi S. Rajamure, and Narendra B. Dahotre, Lasers in Medical Science, DOI: 10.1007/s10103-017-2174-1, 2017.

    2. "A Review of the Physiological and Histological Effects of Laser Osteotomy", Rajitha Gunaratne, Riaz Khan, Daniel Fick, Brett Robertson, Narendra Dahotre, Charlie Ironside, Journal of Medical Engineering & Technology, Vol. 41, No. 1, pp. 1-12, 2017.

    3. "Crystallization behavior during tensile loading of laser treated Fe-Si-B metallic glass", Sameehan S. Joshi, Iman Ghamarian, Peyman Samimi, Shravana Katakam, Peter C. Collins, and Narendra B. Dahotre, Philosophical Magazine, http://dx.doi.org/10.1080/14786435.2016.1265681, 2016.

    4. “Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg- 4Y-3Nd alloy”, N. Kumar, R. S. Mishra, N. B. Dahotre, R.E. Brennan, K.J. Doherty, K.C. Cho, Materials and Design, Volume 110, pp: 663-675, 2016.

    5. “Optimization of laser thermal treatment of Fe-Si-B metallic glass”, Sameehan S. Joshi, Jonathan Z. Lu, Narendra B. Dahotre, Journal of Manufacturing Processes, Vol.24, pp. 31-37, 2016.

    6. “Laser Joining of Plain Carbon Steel Using Fe-based Amorphous Alloy Filler”, Sandip Harimkar, Hitesh Vora, and Narendra B. Dahotre, Journal of Materials Processing Technology, Vol. 238, pp: 55-64, 2016.

    7. “Additive Manufacturing via Surface Engineering”, Narendra B. Dahotre, Hitesh D. Vora, and Benjamin Boesl, Journal of Minerals, Metals and Materials Society (JOM), Vol. 68, No. 7, pp. 1759-1761, 2016.

    8. “Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum”, Hitesh D. Vora, Ravi Shanker Rajamure, Anurag Roy, S.G. Srinivasan, G. Sundararajan, Rajarshi Banerjee, Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM), Vol. 68, No. 7, 2016.

    9. “In Situ Nanocrystallization-Induced Hardening of Amorphous Alloy Matrix Composites Consolidated by Spark Plasma Sintering”, Ashish Singh, Tanaji Paul, Shravana Katakam, Narendra B. Dahotre, and Sandip P. Harimkar, Journal of Minerals, Metals and Materials Society (JOM), Vol. 68, No. 7, 2016.

    10. “Thermodynamics and Kinetics of Laser Induced Transformation in Zirconium based Bulk Metallic Glass”, Hitesh Vora, Sanghita Mridha, Shravana Katakam, Harpreet Singh Arora, Sundeep Mukherjee, and Narendra B. Dahotre, Journal of Non-crystalline Solids, Vol. 432, Part B, pp. 237- 242, 2016.

    11. “Direct-deposited MoS2 Thin Film Electrodes for High Performance Supercapacitors”, Nitin Choudhary, Mumukshu Patel, Yee-Hsien Ho, Narendra B. Dahotre, Geon-Woong Lee, Jun Yeon Hwang, and Wonbong Choi, J. Materials Chemistry A, Vol. 3, pp. 24049-24054, 2015.

    12. “Dynamic Crystallization During Non-isothermal Laser Thermal Treatment of Fe-Si-B Metallic Glass”, Sameehan S. Joshi, Anna V. Gkriniaria, Shravana Katakam, Narendra B. Dahotre, J. Phys. D: Appl. Phys., Vol. 48, No. 49, 2015.

    13. “Tensile Behavior of Laser Treated Fe-Si-B Metallic Glass”, Sameehan S. Joshi, Peyman Samimi, Iman Ghamarian, Shravana Katakam, Peter C. Collins, Narendra B. Dahotre, J. Appl. Phys., 118, 164904 (2015); http://dx.doi.org/10.1063/1.493463.

    14. “Influence of Niobium on Laser De-vitrification of Fe-Si-B Based Amorphous Magnetic Alloys”, T. Alam, T. Borkar, S. Joshi, S. Katakam, X. Chen, Narendra B. Dahotre, R.V. Ramanujan, and R. Banerjee, Journal of Non-crystalline Solids, Vol. 428, pp. 75-81, 2015.

    15. “Amorphous Coatings and Surfaces on Structural Materials", Sameehan Joshi, Shravana Katakam, Harpreet Singh, Sundeep Mukherjee, and Narendra B. Dahotre, Critical Reviews in Solid State and Materials Science, Vol. 41, Issue 1, pp. 1-45, 2015.

    16. “Evolution of Surface Topography during Three-Dimensional Laser Machining of Structural Alumina: Integrated Experimental and Computational Approach”, Hitesh D. Vora and Narendra B. Dahotre; J. Manufacturing Processes, Vol. 19, No. 8, pp. 49-58, 2015.

    17. “Laser Additive High Entropy Alloy Coating on Aluminum: Corrosion Behavior”, Youkang Shon, Sameehan S. Joshi, Shravana Katakam, Ravi Shanker Rajamure, and Narendra Dahotre, Materials Letters, Vol. 142, pp. 122-125, 2015.

    18. “Laser Alloyed Al - W Coatings on Aluminum for Enhanced Corrosion Resistance”, Ravi Shanker Rajamure, Hitesh D. Vora, S. G. Srinivasan, Narendra B. Dahotre, Applied Surface Science, Vol. 328, pp. 205-214, 2015.
    19. “Multiphysics Theoretical Evaluation of Thermal Stresses in Laser Machined Structural Alumina”,Hitesh D. Vora1 and Narendra B. Dahotre, Lasers in Manufacturing and Materials Processing, Vol. 2, pp. 1-23, 2015, DOI 10.1007/s40516-014-0004-x.
    20. “Effect of Iron on Enhancement of Magnetic Properties of Co-Fe Metallic Glasses”, Medha Veligatla, Shravana Katakam, Santanu Das, Narendra Dahotre, Haein Choi-Yim, Sundeep Mukherjee”, Metallurgical and Materials Transactions, in press, December 13, 2014.
    21. “Laser Assisted High Entropy Alloy: Coating on Aluminum: Microstructural Evaluation”, Shravana Katakam, Sanghita Mridha, Sundeep Mukherjee, Narendra Dahotre, J. Appl. Phys.,  http://dx.doi.org/10.1063/1.4895137, 2014.

    22. “Laser Surface Alloying of AZ31B Mg Alloy for Bio Wettability”, Yee-Hsien Ho, Hitesh D Vora, and Narendra B. Dahotre, J. Biomaterials Application, DOI: 10.1177/0885328214551156, August 13, 2014.

    23. “Laser Surface Modification of molybdenum on aluminum for enhanced wear resistance”, Ravi Shanker Rajamure, Hitesh D Vora, Niraj Gupta, Shivraj Karewar, S.G. Srinivasan, Narendra B. Dahotre, Surface Coatings & Technology, Vol. 258, pp. 337-342, 2014.

    24. “MC3T3-E1 Osteoblast Adhesion to Laser Induced Calcium Phosphate Coating on Ti Alloy: an In Vitro Centrifugation Study”, Lu Huang, Samuel Goddard, S. Soundarapandian, Yu Cao, Narendra B. Dahotre, and Wei He, Biomaterials and Biomedical Engineering, Vol. 1, No. 2, pp. 71-83, 2014.

    25. “Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-entropy Alloys by Laser Melting”, Travis G. Novak, Hitesh Vora, Rajiv S. Mishra, Marcus L. Young and Narendra B. Dahotre,  Metallurgical and Materials Transactions B, DOI: 10.1007/s11663-014-0170-4, 2014.

    26. “Improved Soft Magnetic Properties by Laser De-vitrification of Fe-Si-B Amorphous Magnetic Alloys”, C. Smith, S. Katakam, S. Nag, C. Xi, R.V. Ramanujan, Narendra B. Dahotre, and R. Banerjee, Materials Letters, Vol. 122, pp. 155-158, 2014.
    27. “Structural Relaxation and Nanocrystallization Induced Laser Surface Hardening of Fe-based Bulk Amorphous Alloys”, Ashish K. Singh, S. Habib Alavi, Sameer R. Paital, Narendra B. Dahotre and Sandip P. Harimkar, Journal of Minerals, Metals and Materials Society (JOM), Vol. 66, No. 6, pp. 1080-1087, 2014.
    28. “Integrated Experimental and Theoretical Approach for Corrosion and Wear Evaluation of Laser Surface Nitrided Ti-6Al-4V Biomaterial in Physiological Solution”, Hitesh D Vora, Ravi Shanker Rajamure, Sanket N Dahotre; Yee-Hsein Ho, Rajarshi Banerjee, and Narendra B. Dahotre, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 37, No. 9, pp. 153-164, 2014.
    29. "Laser Patterning of Fe-Si-B Amorphous Ribbons in Magnetic Field", Shravana Katakam and Narendra B. Dahotre, Journal of Applied Physics-A, DOI 10.1007/s00339-014-8512-2, 2014.
    30. “Laser Assisted Fe-based Bulk Amorphous Coating: Thermal Effects and Corrosion”, Shravana Katakam; Vivek Kumar; Soundarapandian Santhanakrishnan; Ravishankar Rajamure; Peyman Samimi; Narendra Dahotre, Journal of Alloys and Compounds, Vol. 604, pp. 266-272, 2014.
    31. "Comparison of the Crystallization Behavior of Fe-Si-B-Cu and Fe-Si-B-Cu-Nb Based Amorphous Soft Magnetic Alloys" Casey Smith, Shravana Katakam, Soumya Nag, Y Zhang, Jiayan Law, R. Ramanujan, Narendra B. Dahotre, and Rajarshi Banerjee, Materials & Metallurgical Transactions A, Vol. 45A, pp. 2998-3009, 2014.
    32. "Laser Machining of Structural Alumina: Influence of Moving Laser Beam on the Evolution of Surface Topography", Hitesh D. Vora and Narendra B. Dahotre, International Journal of Applied Ceramic Technology, in press, December 30, 2013.
    33. “Laser Assisted Crystallization of Ferromagnetic Amorphous Ribbons: A Multi-modal Characterization and Thermal Model Study”, Shravana Katakam, Arun Devaraj, Mark Bowden, S.Santhanakrishnan,
    34. Casey Smith, Raju Ramanujan, Thevuthasan Suntharampillai, Rajarshi Banerjee, and Narendra B. Dahotre, J. Applied Physics, http://dx.doi.org/10.1063/1.4829279, 2013.
    35. "Laser In-situ Synthesis of TiB2-Al Composite Coating for Improved Wear Performance,  Surface Alloying of Molybdenum on Aluminum for Corrosion Protection" Shravan Katakam, Nan Asiamah, S. Santhanakrishnan, and Narendra Dahotre, Surface and Coatings Technology,http://dx.doi.org/10.1016/j.surfcoat.2013.09.047, 2013.
    36. “Wettability of Nano-textured Metallic Glass Surfaces”, Harpreet Singh Arora, Quan Xu, Zhenhai Xia, Yee-Hsien Ho, Narendra Dahotre, Jan Schroers, Sundeep Mukherjee, Scripta Materialia, http://dx.doi.org/10.1016/j.scriptamat.2013.08.014, 2013.
    37. "Laser Induced Nitrogen Enhanced Titanium Surfaces for Improved Osseo-integration," Sanket N. Dahotre, Hitesh D. Vora, Ravi Shanker Rajamure, Lu Huang, Rajarshi Banerjee, Wei He, Narendra B. Dahotre, Annals of Biomedical Engineering, DOI: 10.1007/s10439-013-0898-z, 2013
    38. “ Laser Coating of Aluminum Alloy EN AW 6082-T651 with TiB2 and TiC: Mirostructure and Mechanical Properties”, Dunja Ravnikar, Narendra B. Dahotre, Janez Grum, Applied Surface Science, doi.org/10.1016/j.apsusc.2013.06.089, 2013.
    39. “Characterization of Nanocrystallization Behavior of Spark Plasma Sintered Fe48Cr15Mo14Y2C15B6 Bulk Amorphous Alloys Using Extended Q-Range Small Angle Neutron Scattering”, Ashish Singh, Shravan Katakam, Jan Illavsky, Narendra B. Dahotre, Sandip P. Harimkar, J. Applied Physics, 114, 054903 (2013); doi: 10.1063/1.4817379.*
    40. “Microstructure and Mechanical Properties of a Laser Coated TiB2/TiC/Al Layer on an Aluminum Alloy Substrate”, D. Ravnikar, N.B. Dahotre, and J. Grum, Lasers in Engineering, Vol. 0, pp. 1-16, 2013.
    41. “Design and Optimization of Microstructure for Improved Corrosion Resistance of Laser Surface Alloyed Aluminum with Molybdenum”, Hitesh D. Vora, Ravi Shankar Rajamure, S. Santhanankrishnan, S.G. Srinivasan, and Narendra B. Dahotre, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 8, pp. 1421-1432, 2013.
    42.  “Macro and Microstructural Study of Laser Processed WE43 (Mg-Y-Nd) Magnesium Alloy”, S. Santhankrishnan, N. Kumar, N. Dengde, D. Chaudhuri, S. Katakam, S. Palanivel, H.D. Vora, R. Banerjee, R.S. Mishra, and Narendra B. Dahotre, Metallurgical and Materials Transactions B, Vol. 44, Issue 5, pp: 1190-1200, 2013.
    43. “Multiscale Laser Materials Engineering: Energy-Efficient Processing and Materials Performance”, Narendra B. Dahotre, Nanomaterials and Energy, Vol. 2, Issue NME2, pp. 69-75, 2013
    44. “Laser Machining of Structural Ceramics” Hitesh D. Vora and Narendra B. Dahotre, American Ceramic Society Bulletin, Vol. 92, No. 5, pp: 4-5, 2013
    45. “Dilution of Molybdenum on Aluminum during Laser Surface Alloying”, H.D.Vora, R.S. Rajamure, S. Soundarapandian, S. G. Srinivasan, Narendra B. Dahotre, Journal of Alloys and Compounds, Vol. 570, pp. 133-143, 2013.
    46. “Laser Surface Modification of Alumina:  Integrated Computational  and Experimental Analysis”, Marco A. Moncayo, Soundarapandian Santhanakrishnan, Hitesh D. Vora, Sameer R. Paital, and Narendra B. Dahotre, Ceramic International, dx.doi.org/10.1016/j.ceramint.2013.01.040, 2013
    47. “One-dimensional Multi-pulse Laser Machining of Structural Alumina: Evolution of Surface Topography”, Hitesh D Vora, S. Santhanakrishnan, Sandip P. Harimkar, Sandra K. S. Boetcher, and Narendra B. Dahotre, the International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-012-4709-8, 2013.
    48. “Laser deposited Biocompatible Ca-P coatings on Ti-6Al-4V: Microstructural Evolution and Thermal Modeling”, Soumya Nag, Sameer R. Paital, Peeyush Nandawana, Kristopher Mahdak, Yee Hsien Ho, Hitesh Vora, Rajarshi Banerjee, Narendra B. Dahotre, Materials Science & Engineering C: Materials for Biological Applications, Vol. 33, Issue 1, pp: 165-173, 2013.
    49. “Computational Modeling and Experimental Based Parametric Study of Multi-Track Laser Processing of Alumina”, Marco A. Moncayo, Soundarapandian Santhanakrishnan, Hitesh D. Vora, Sameer R. Paital, and Narendra B. Dahotre, Optics and Laser Technology,http://dx.doi.org/10.1016/j.optlastec.2012.11.019.
    50. “Evolution of Surface Topography in One-Dimensional Laser Machining Structural Alumina”, H. D. Vora, S. Soundarapandian, S. P. Harimkar, S. K. S. Boetcher, and Narendra B. Dahotre, Journal of the European Ceramic Society, Vol. 32, Issue 16, pp: 4205-4218, 2012.
    51. “Laser coating of hydroxyapatite on Mg for enhanced physiological corrosion resistance and biodegradability”, S. Santhanakrishnan, Y. H. Ho and N. B. Dahotre, Materials Technology, DOI 10.1179/1753555712Y.0000000022.
    52. “Fe-Based Amorphous Coatings on AISI 4130 Structural Steel for Corrosion Resistance”, Shravan Katakam, S. Santhanakrishnan, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM), Vol. 64, No. 6, pp: 709-715, 2012.
    53. “Stress-Induced Selective Nano-crystallization in Laser Processed Amorphous Fe-Si-B Alloys”, Shravana Katakam, S. Santhanakrishnan, Hitesh Vora, Junyeon Hwang, R. Banerjee, and N. B. DahotrePhilosophical Magazine Letters, Vol. 92, Issue 11, pp: 617-624, 2012.
    54. "Synthesis of TiB2-TiC/Fe nano-composite coating by laser surface engineering", Baoshuai Du, Sameer R. Paital, and Narendra B. Dahotre, Optics & Laser Technology, in press, May 18, 2012.
    55. "In situ Laser Synthesis of Fe-based Amorphous Matrix Composite Coating on Structural Steel" Shravan Katakam, Sameer Paital, Junyeon Hwang, Rajarshi Banerjee, and Narendra Dahotre, Metallurgical and Materials Transactions A, Vol. 43, No. 13, pp: 4957-4966, 2012.
    56. “Pulsed Laser Surface Modification of AZ31B Mg with Al-Si”, Baoshuai Du, Sameer R. Paital, and Narendra B. Dahotre, Surface Review and Letters, Vol. 19, No. 02, (2012) 1250015, DOI: 10.1142/S0218625X12500151.
    57. “Improved Corrosion and Wear Resistance of Mg Alloys via Laser Surface Modification of Al on AZ31B”, Sameer R. Paital, Ananya Bhattacharya, Marco Moncayo, Yee Hsien Ho, Kristopher Mahdak, Soumya Nag, Rajarshi Banerjee, Narendra B. Dahotre, Surface Coating & Technology, Vol. 206, No. 8-9, pp. 2308-2315, 2012.
    58. “Laser-induced Thermal and Spatial Nanocrystallization of Amorphous Fe–Si–B Alloy”, Shravana Katakam, Jun Y. Hwang, Hitesh Vora, Sandip P. Harimkar,Rajarshi Banerjee and Narendra B. Dahotre, Scripta Materialia, Vol. 66, pp. 538-542, 2012.
    59. “Densification Behavior and Wear Response of Spark Plasma Sintered Iron-based Bulk Amorphous Alloys”, Ashish Singh, Sameer R. Paital, Abhinay Andapally, Narendra B. Dahotre, Sandip P. Harimkar, Advanced Engineering Materials, Vol. 14, Issue 6, pp: 400-407, 2012.
    60. “Osteoblast Interaction with Laser Cladded HA and SiO2-HA Coating on Ti-6Al-4V” Yuling Yang, Kaan Serpersu, Wei He, Sameer R Paital, and Narendra B Dahotre, Materials Science and Engineering C, Vol. 31, pp. 1643-1652, 2011.
    61. “Electrochemical and Mechanical Behavior of Laser Processed Ti6Al4V Surface in Ringers Physiological Solution”, Raghuvir Singh, S.K. Tiwari, Suman K. Mishra, and Narendra B. Dahotre, J. Materials Science: Materials in Medicine, Vol. 22, pp. 1787-1796, 2011.
    62. “Laser Surface Modification for Synthesis of Controlled Textured Bioactive and Biocompatible Ca-P Coatings on Ti-6Al-4V”, Sameer R. Paital, Nancy Bunce, Peeyush Nandwana, Chinmay Honrao, Soumya Nag, Wei He, Raj Banerjee, Narendra B. Dahotre, Journal of Materials Science: Materials in Medicine, Vol.22, No.6, pp. 1393-1406, 2011.
    63. “Periodically Laser Patterned Fe-B-Si Amorphous Ribbons: Phase Evolution and Mechanical Behavior” Sandip P. Harimkar, Sameer R. Paital, Gangyao Wang, Peter K. Liaw, Narendra B. Dahotre, Advance Engineering Materials, Vol. 13, No. 10, pp. 955-960, 2011.
    64. “Wear Behavior of Plasma Electrolytic Oxidation (PEO) and Hybrid Coatings of PEO and Laser on MRI 230D Magnesium Alloy”, G. Rapheal, S. Kumar, C. Blawert and Narendra B. Dahotre, Wear, Vol. 271, Issues 9-10, pp. 1987-1997, 2011
    65. “Absorptivity Transition in 1.06 μm Wavelength Laser Machining of Structural Ceramics”, Anoop N. Samant and Narendra B. Dahotre, Int. J. Appl. Ceramic Technology, Vol. 8, Issue 1, pp: 127–139, January/February 2011.
    66. “Wetting Effects on In-vitro Bioactivity and In-vitro Biocompatibility of Laser Micro-textured Ca-P Coating”, Sameer R. Paital, Zheng Cao, Wei He, Narendra B. Dahotre, Biofabrication, Vol. 2, No. 2, pp. 1-14, 2010
    67. “Wetting and in Vitro Bioactivity of Laser Processed CaP Coating with Presence and Variation of SiO2 on Ti-6Al-4V” Yuling Yang, Sameer R Paital, Narendra B Dahotre, Materials Technology: Advanced Performance Materials, Vol.25, No.3-4, pp.137-142, 2010.
    68. “Laser Pulse Dependent Micro Textured Calcium Phosphate Coatings for Improved Wettability and Cell Compatibility”, Sameer R. Paital, Wei He, Narendra B. Dahotre, Journal of Materials Science: Materials in Medicine, Vol. 21, No. 7, pp: 2187-2200, 2010.
    69. “Laser Process Effect on the Texture Evolution and Wetting Behavior in Implantable Ti-6Al-4V Alloys”, Sameer R. Paital, Wei He, Claus Daniel, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM), Vol. 62, No. 6, pp: 76-83, 2010.
    70. “Effects of SiO2 Substitution on Wettability of Laser Deposited Ca-P Biocoating on Ti-6Al-4V” Yuling Yang, Sameer R Paital, Narendra B Dahotre, Journal of Materials Science: Materials in Medicine, Vol. 21, pp. 2511-2521, 2010.
    71. “Fractal Approach to Laser Processed Surfaces”, Anil Kurella and Narendra Dahotre, Advanced Engineering Materials, Vol. 12, Issue 6, pp: 517–521, 2010.
    72. "Wetting Behavior of Laser Synthetic Micro Textures on Ti-6Al4V for Bioapplication” Narendra B Dahotre, Sameer R. Paital, Anoop N Samant, and Claus Daniel, Philosophical Transactions of The Royal Society-A, Vol. 368, pp. 1863-1889, 2010.
    73. "Three- Dimensional Laser Machining of Structural Ceramics" Anoop N Samant, Baoshuai Du and Narendra B Dahotre, J Manufacturing Processes, Vol. 12, pp. 1-7, 2010.
    74. “Fabrication and Evaluation of Pulse Laser Induced Ca-P Coating on a Ti-alloy for Bioapplication”, Sameer R. Paital, Kantesh Balani, Arvind Agarwal, and Narendra B. Dahotre, Biomedical Materials, doi:10.1088/1748-6041/4/1/015009.
    75. “A Thermal Model for Laser Interaction with Thick Dielectric Film on Metallic Substrate: Application to Ca-P Layer on Ti Alloy”, Sameer R. Paital and Narendra B. Dahotre, J. Alloys and Compounds, Vol. 487, No.1-2, pp. 499-503, 2009.
    76. “Faceted Surface Grain Morphology of Rapidly Solidified Alumina: Characterization and Potential Applications", Sandip P. Harimkar, Edward A. Kenik, Sanghoon Shim, and Narendra B. Dahotre, Adv. Eng. Mater., Vol.11, No.12, pp. 1030-1033, 2009.
    77. “Physical Effects of Multipass Two Dimensional Laser Machining of Structural Ceramics”, Anoop N. Samant and Narendra B. Dahotre, Adv. Eng. Mater., Vol. 11, No. 7, pp. 579-585, 2009.
    78. "Computational Approach to Photonic Drilling of Silicon Carbide" by Anoop N Samant, Claus Daniel, Ron H Chand, Craig A Blue and Narendra B Dahotre, International Journal of Advanced Manufacturing Technology, Vol. 45, pp.704- 713, 2009.
    79. “Microstructure and Properties  of Spark Plasma Sintering of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass”,
    80. Sandip P. Harimkar, Sameer R. Paital, Ashish Singh, Robert Aalund, and Narendra B. Dahotre, J. Non-Crystalline Solids,  Vol. 355, pp. 2179-2182, 2009.
    81. "Calcium Phosphate Coatings for Bio Implant Applications:  Materials, Performance Factors, and Methodologies", Sameer R. Paital and Narendra B. Dahotre, Materials Science & Engineering – R: Reports, Vol. 66, No. 1-3, pp. 1-70, 2009.
    82. “In-situ Absorptivity Prediction during 1.06 μm Wavelength Laser Low Aspect Ratio Machining of Structural Ceramics” Anoop N Samant, Baoshuai Du and Narendra B Dahotre, Physica Status Solidi, Vol. 206, No. 7, pp. 1433-1439, 2009.
    83. “Wettability and Kinetics of Hydroxyapatite Precipitation on Laser Textured Ca-P Bioceramic Coating”, Sameer R. Paital and Narendra B Dahotre, Acta Biomaterialia, Vol. 5, No. 7, pp. 2763-27772, 2009.
    84. “Laser Surface Cladding of MRI 153M Magnesium Alloy with (Al+Al2O3)”, M. Hazra, A. K. Mondal, S. Kumar, C. Blawert, and Narendra. B. Dahotre, Surface and Coating Technology, Vol. 203, No. 16, pp. 2292-2299, 2009.
    85. “Pulsed Laser Surface Treatment of Magnesium: Correlation between Thermal Model and Experimental Observations” , Anoop N. Samant, Baoshuai Du, Sameer R. Paital, Subodh Kumar, and Narendra B. Dahotre, J. Materials Processing Technology, Vol. 209, No. 11, pp. 5060-5067,2009
    86. “Rapid Surface Microstructuring of Porous Alumina Ceramic Using Continuous Wave Nd:YAG Laser”, Sandip P Harimkar, Narendra B Dahotre, J. Materials Processing Technology, Vol. 209, No. 10, pp. 4744-4749, 2009..
    87. "Laser Surface Multilevel Self Assembly of CaP-TiO2 Particles" Anil K. Kurella, Anoop N Samant, and Narendra B Dahotre, Journal of Applied Physics, Vol. 29, No. 6, pp. 969-993, 2009.
    88. “Laser Machining of Structural Ceramics: A Review”, Anoop N. Samant and Narendra B. Dahotre, Journal of European Ceramic Society, Vol. 29, No. 6, pp. 969-993, 2009.
    89. “Laser Melting of Plasma Sprayed Aluminum Oxide Coatings Reinforced with Carbon Nanotubes”, Y.Chen, A. Samant, K. Balani, Narendra B. Dahotre, A. Agarwal, Applied Physics-A: Materials Science & Processing, Vol. 94, No. 4, pp 861-870, 2009.
    90. “An Integrated Computational Approach to Single Dimensional Laser Machining of Magnesia”
    91. Anoop N. Samant, and Narendra B. Dahotre, Optics and Lasers in Engineering, Vol. 47, No. 5, pp. 570-577, 2009.
    92. “ Differences in Physical Phenomena Governing Laser Machining of Structural Ceramics”, Anoop N. Samant and Narendra B. Dahotre, Ceramic International, Vol. 35, No. 5, pp. 2093-2097, 2009.
    93. “Physical Effects of Multipass Two-Dimensional Laser Machining of Structural Ceramics”, Anoop N. Samant and Narendra B. Daotre,Adv. Eng. Materials, Vol. 11, No. 7, pp. 579-585, 2009.
    94. Laser Surface Coating of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass Composition on AISI 4140 Steel”, A. Basu, A.N. Samant, S.P. Harimkar, J. Dutta Majumdar, I. Manna, and Narendra B. Dahotre, Surface & Coatings Technology, Vol. 202, No. 12, pp. 2623-2631, 2008.
    95. “Pulsed Laser Synthesis of Ceramic-Metal Composite Coating on Steel”, Baoshuai Du, Anoop N. Samant, Sameer R. Paital, and Narendra B. Dahotre, Applied Surface Science, Vol. 255, pp. 3188-3194, 2008.
    96. “Multiscale Wear of Plasma-sprayed Carbon-nanotube-reinforced Aluminum Oxide Nanocomposite Coating”, Kantesh Balani, Sandip P. Harimkar, Anup Keshri, Yao Chen, Narendra B. Dahotre, Arvind Agarwal, Acta Materialia, Vol. 56, pp. 5984-5894, 2008.
    97. “Laser Based Biomimetic and Bioactive Coatings”, Sameer R. Paital and Narendra B. Dahotre, Materials Science and Technology, Vol. 24, No. 9, pp. 1144-1161, 2008.
    98. “Phase Constituents and Microstructure of Laser Synthesized TiB2-TiC Reinforced Composite Coating on Steel”, Baoshuai Du and Narendra B. Dahotre, Scripta Materialia, Vol. 59, pp. 1147-1150, 2008.
    99. “Computational Predictions in Single-Dimensional Laser Machining of Alumina”, Anoop N. Samant and Narendra B. Dahotre, International Journal of Machine Tools & Manufacture, Vol. 48, No. 12-13, pp. 1345-1353, 2008.
    100. “Ab initio Physical Analysis of Single Dimensional Laser Machining of Silicon Nitride”, Anoop N. Samant and Narendra B. Dahotre, Advanced Engineering Materials, Vol. 10, No. 10, pp. 978-981, 2008.
    101. “Controlled Evolution of Morphology and Microstructure in Laser Interference Structured Zirconia”, Claus Daniel, Beth L. Armstrong, Narendra B. Dahotre, J. Amer. Ceram. Soc., Vol. 91, No. 7, pp. 2138-2142, 2008.
    102. “Process Optimization in Laser Surface Structuring of Alumina”, Anoop N. Samant, Sameer R. Paital and Narendra B. Dahotre, J. Mater. Proc. Tech., No. 203, pp. 498-504, 2008.
    103. “Microindentation Fracture Behavior of Laser Surface Modified Alumina Ceramic”, Sandip P. Harimkar and Narendra B. Dahotre, Scripta Materialia, No. 58, pp. 545-548, 2008.
    104. “Effect of Microstructural Evolution on Wettability of Laser Coated Calcium Phosphate on Titanium Alloy”, Anil K. Kurella, Michael Z. Hu, and Narendra B. Dahotre, Materials Science and Engineering -C: Biomimetic Materials, Sensors and Systems, Vol. 28, No. 8, pp. 1560-1564,2008.
    105. “Effect of Laser Surface Treatment on Corrosion and Wear Resistance of ACM720 Mg Alloy”, A. K. Mondal, S. Kumar, C. Blawert and Narendra B. Dahotre, Surface & Coatings Technology,  Vol. 202, No. 14, pp. 3187-3198, 2008.
    106. “Multilevel Residual Stress Evaluation in Laser Surface Modified Alumina”, Anoop N. Samant1, and Narendra B. Dahotre, Applied Physics A: Materials Science & Processing, Vol. 90, pp. 493-499, 2008.
    107. “Laser Surface Processing of Ti6Al4V in Gaseous Nitrogen: Corrosion Performance in Physiological Solution”, Raghuvir Singh, S. Ghosh Chowdhury, S. K. Tiwari and Narendra B. Dahotre, J. Mater. Sci: Mater. Med., Vol. 19, pp. 1363-1369, 2008.
    108. “Influence of Laser Fluence on the Microstructure Evolution and Fractal Dimensions of Laser Surface Modified Alumina Ceramic”, Sandip P. Harimkar and Narendra B. Dahotre, Materials Characterization, Vol. 59, pp. 700-707, 2008.
    109. “Laser Beam Operation Mode Dependent Grain Morphology of Alumina”, Anoop N. Samant, Sandip P. Harimkar and Narendra B. Dahotre, J. Appl. Phys., 102, 123105, 2007.
    110. “Laser Surface Treatment for Porous and Textured Ca-P Bio-Ceramic Coating on Ti-6Al-4V”, Sameer R. Paital and Narendra B. Dahotre, Biomedical Materials, Vol. 2, pp. 274-281, 2007.
    111. “Laser Surface Cladding of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass on AISI 4041 Steel”, A. Basu, A. N. Samant, S. P. Harimkar, J. Dutta Majumdar, I. Manna, and Narendra B. Dahotre, Surface and Coatings Technology, Vol. 202, pp. 2623-2631, 2007.
    112. “Temporally Evolved Recoil Pressure Driven Melt Infiltration During Laser Surface Modifications of Porous Alumina Ceramic”, Sandip P. Harimkar, Anoop. N. Samant, and Narendra B. Dahotre, J. Appl. Phys., Vol. 101, 054911-1/7, 2007.
    113. “Tribological Behavior of Plasma Sprayed Carbon Nanotube Reinforced Hydroxyapatite-Coating in Physiological Solution”, Kantesh Balani, Yao Chen, Sandip P. Harimkar, and Narendra B. Dahotre, Arvind Agarwal, Acta Biomaterialia,  Vol. 3, pp. 944-951, 2007.
    114. “Laser Surface Modifications of Advanced ceramics – A Modeling Approach”, Anoop N. Samant, Sandip P. Harimkar, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM), Vol. 59, No. 8, 2007.
    115. “Validation of Crystallographic Correlation for Faceted Morphology in Laser Surface Engineered Alumina Ceramic”, S.P. Harimkar, C. Daniel, C. Holzapfel, P. Leibenguth, F. Mϋcklich, and Narendra B. Dahotre, Scripta Mater, Vol. 57, Issue 5, pp. 401-404, 2007.
    116. “Corrosion Degradation and Prevention by Surface Modification of Biometallic Materials”, Raghuvir Singh and Narendra B. Dahotre, J. Materials Science: Materials in Medicine, Vol. 18, pp. 725-751, 2007.
    117. “State of Residual Stress in Laser Deposited Ceramic Composite Coatings on Aluminum Alloy”, P.B.  Kadolkar, T.R. Watkins, J. Th. M. DeHosson, B.J. Kooi, and Narendra B. Dahotre, in Acta Materialia, Vol. 55, pp. 1203-1214, 2007.
    118. “Laser Assisted Densification of Surface Porosity in Structural Alumina Ceramic”, S.P. Harimkar and N.B. Dahotre, Physica Status Solidi (a), Vol. 204, No. 4, pp.1105-1113, 2007.
    119. “Laser Cleaning and Dressing of Vitrified Grinding Wheels”, M.J. Jackson, A. Khangar, X. Chen, G.M. Robinson, V.C. Venkatesh, Narendra B. Dahotre; Journal of Materials Processing Technology, Vol. 185, pp. 17–23. 2007.
    120.  “Computational prediction of grain size during rapid laser surface modification of Al-O Ceramic”, Anoop N. Samant and Narendra B. Dahotre, Physica Status Solidi (Rapid Research Letters), pp. 1-3, 2006.
    121. “Effect of Laser Fluence on Surface Microstructure of Alumina Ceramic”, S.P. Harimkar and N.B. Dahotre, Advances in Applied Ceramics, Vol. 105, pp. 304-308, 2006.
    122. “Laser Induced Hierarchical Calcium Phosphate Structures”, Anil Kurella and Narendra B. Dahotre, Acta Biomaterialia, Vol. 2, pp. 677-688,2006.
    123. “Microgrinding Hypereutectoid Steels Using Laser Modified Corundum Abrasive Materials”, M. J. Jackson, G. M. Robinson, A. Khangar, E. A. Kenik, and Narendra B. Dahotre; International Journal of Machining and Machinability of Materials, Vol 1, No. 1, pp. 12-26, 2006.
    124. “Laser Induced Functionally Textured Bio-coating”, Anil Kurella and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM), Vol. 58, No. 7, pp. 64-66, 2006.
    125. “Crystallographic and Morphological Textures in Laser Surface Modified Alumina Ceramic”, S.P.  Harimkar and Narendra B. Dahotre, J. Applied Phys. Vol. 100, pp. 1-6, 2006.
    126. “Laser Dressing of Alumina Grinding Wheels”, Abhijeet khangar, Narendra B. Dahotre, Mark J. Jackson, Grant M. Robinson, J. Materials Engineering and Performance, Vol. 15, No. 2, pp. 178-181(4), 2006.
    127. “Phase Modulated Hierarchical Surface Structures by Interfering Laser Beams”, Claus Daniel and Narendra B. Dahotre, Advanced Engineering Materials, Vol. 8, No. 10, pp. 925-932, 2006.
    128. “Evolution of Surface Morphology in Laser dressed Alumina Grinding Material”, S. P. Harimkar, and Narendra B. Dahotre, Intl. J. Appl. Ceramic Technology, Vol. 3, No. 5, pp. 375-381, 2006.
    129. “Laser Induced Multi-scale Textured Zirconia Coating on Ti-6Al-4V”, Anil Kurella and Narendra B. Dahotre, J. Materials Science: Materials in Medicine, Vol.17, pp. 565-572, 2006.
    130. “Prediction of Solidification Microstructures During Laser Dessing of Alumina Grinding Wheel Material”, S. P. Harimkar, A. N. Samant, A. A. Khangar, and Narendra B. Dahotre, J. Physics-D: Applied Physics, Vol. 39, pp. 1642-1649,2006.
    131. “High-density-infrared Treatment of Mineral Processing Equipment for Enhanced Wear Resistance”, Minerals Engineering, D. Tao, C. Blue, N.B. Dahotre, R. Honaker, B.K. Parekh, P.G.Engleman, C. Zhao, H. Han, Minerals Engineering, Vol. 19, pp.190-196, 2006.
    132. “Laser Synthesis of Palladium-Alumina Composite Membranes for Production of High Purity Hydrogen from Gasification”, Applied Surface Science”, Binay Singh, Atul Sheth, and Narendra B. Dahotre,  Applied Surface Science,  Vol. 253, No. 3, pp. 1247-1254 2006.
    133. “Molecular  Modeling  of Metastable  FeB49  Phase  Evolution in Laser Surface Engineered Coating”, Kantesh  Balani,  Arvind  Agarwal,  and  Narendra  B.  Dahotre, Journal of Applied Physics, Vol. 99, pp. 1-4, 2006.
    134. “Laser Surface Cladding of Fe-B-C, Fe-B-Si and Fe-BC-Si-Al-C on Plain Carbon Steel”, I. Manna, J. Dutta Majumdar, B. Ramesh Chandra, S. Nayak, and Narendra B. Dahotre, Surface and Coatings Technology, Vol. 201, pp. 434-440, 2006.
    135. "Laser Surface Modification of Ti-6Al-4V: Wear and Corrosion Characterization in Simulated Bio-fluids”, R. Singh, A. Kurella, and Narendra B. Dahotre, Journal of Biomaterials Applications, Vol. 21, No. 1, pp. 46-72, 2006.
    136. “Tribology of Laser Modified Surface of Stainless Steel in Physiological Solution”, Raghuvir Singh and Narendra B. Dahotre, J. Mater. Sci, Vol. 40, No. 21, pp. 5619-5626, 2005.
    137. “The Application of Laser-Induced Multi-Scale Surface Texturing", P. Gregory Engleman, Anil Kurella, Annop Samant, Craig A. Blue, and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM), Vol. 57, No. 12, pp. 46-50, 2005.
    138. "Morphological Modification in Laser Dressed Alumina Grinding Material for Microscale Grinding", A. Khangar and Narendra B. Dahotre, J. Materials Processing Technology, Vol. 170, pp. 1-10, 2005.
    139. “Microstructure and Microtexture in Laser-dressed Alumina Grinding Wheel Material”, A. Khangar, Edward A. Kenik, and Narendra B. Dahotre, Ceramics International, Vol. 31, pp. 621-629, 2005
    140. "A Comparative Study to Estimate Effective Elastic Modulus of Laser Engineered Composite Boride Coating", T. Laha, A. Agarwal, and Narendra B. Dahotre, Advanced Engineering Materials, Vol.7, No. 7, pp.326-328, 2005.
    141. "Thermal Transitions in Fe-Ti-Cr-C Quaternary System used as Precursor During Laser In-Situ Carbide Coating", A. Singh, Wallace D. Porter, and Narendra B. Dahotre, Materials Science and Engineering: A, Vol. 399, pp. 318-325, 2005.
    142. "Tribology of Laser Modified Surface of Stainless Steel in Physiological Solution", R. Singh and Narendra B. Dahotre, J. Materials Science, Vol. 40, No. 21, pp. 5619-5626, 2005.
    143. "Nanocoating for Engine Application", S. Nayak and Narendra B. Dahotre, Surface and Coatings Technology, Vol. 194, pp. 58-67, 2005.
    144. "Surface Modification for Bioimplants: The Role of Laser Surface Engineering", Anil Kurella and Narendra B. Dahotre, Journal of Biomedical Applications, Vol. 20, No. 1, pp. 5-50, 2005.
    145. “Influence of Laser Surface Modification on Corrosion Behavior of Stainless Steel 316L and Ti6Al4V in Simulated Body Fluid" Raghuvir Singh, Madhavi Martin and Narendra B. Dahotre Surface Engineering, Vol. 21, No. 4, pp. 1-10, 2005.
    146. “Observation of Exothermic Reaction During Laser Assisted Iron Oxide Coating on Aluminum Alloy” by S. Nayak, Hsin Wang, Edward A. Kenik, Ian M. Anderson and Narendra B. Dahotre, Materials Science and Engineering: A, Vol. 390, Issues 1-2, pp. 404-413, 2005.
    147. “Phase Evolution during Laser In-Situ Carbide Coating”, Anshul Singh and Narendra B. Dahotre, Metallurgical and Materials Transactions-A, Vol. 36A, pp. 797-803, 2005.
    148. “Thermography During Laser Surface Melting of Cast Aluminum Alloy”, by S. Nayak, H. Wang, and Narendra B. Dahotre, Materials Science and Technology, Vol. 20, pp. 1609-1614, 2004.
    149. “Auger Microscopy of Laser Induced Fe-oxide/Al Reaction Composite Coating”, S. Nayak, H.M. Meyers, III, and Narendra B. Dahotre, Surface Engineering, Vol.  20, No. 1, pp. 48-52, 2004.
    150. “Laser In-Situ Synthesis of Combinatorial Coating on Steel”, Anshul Singh and Narendra B. Dahotre, Journal of Materials Science, Vol. 39, pp. 4553-4560, 2004.
    151. “In-situ Formation of Ni-alumina Nanocomposite During Laser Processing”, S.C. Kuiry, S. Wannaparhum, Narendra B. Dahotre, and S. Seal, Scripta Materialia, Vol. 50, pp. 1237-1240, 2004.
    152. “Infrared Thermography During Laser Surface Engineering of Ceramic Coating on Metal”, Puja Kadolkar, H. Wang, T. R. Watkins, and Narendra B. Dahotre, Int. J. Advanced Manufacturing Technology, Vol. 23, No. 7, pp. 350-357, 2004.
    153. Nanosurfacing for Engine Application", S. Nayak and Narendra B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM), Vol. 56, No. 1, pp. 46-48, 2004.
    154. "Instrumented Indentation Characterization of Laser-Remelted A319Al Alloy", S. Nayak, L. Reister and Narendra B. Dahotre, Journal of Materials Research, Vol 19, No 1, pp. 202-207, 2004.
    155. “Laser Dressing of Vitrified Aluminum Oxide Grinding Wheels”, Narendra B. Dahotre, A. Khangar,M. J. Jackson and G. M. Robinson, and R. Moss, British Ceramic Transactions, Vol. 102, No. 6, pp. 237-245, 2003.
    156. “Micro-mechanical Properties of Laser Induced Iron Oxide-Aluminum Matrix Composite Coating”, S. Nayak, L. Reister, H.M. Meyer, III, and Narendra B. Dahotre, Journal of Materials Research, Vol 18, No 4, pp. 833-839, 2003.
    157. “Instrumented Indentation Characterization of Laser Induced Fe3O4/Al Composite Coating”, S. Nayak and Narendra B. Dahotre, Advanced Engineering Materials, Vol. 5, No. 4, 2003.
    158. “Effect of Processing Parameters on the Cohesive Strength of Laser Surface Engineered Ceramic Coatings on Aluminum Alloys”, Puja Kadolkar and Narendra B. Dahotre, Materials Science and Engineering: A, Vol. 342, No. 1-2, pp. 183-191, 2003.
    159. “Laser Surface Engineering”, Narendra B. Dahotre, Advanced Materials & Processing, Vol. 160, No. 7, pp. 35-39, 2002.
    160. “The Laser Induced Combustion Synthesis of Iron Oxide Nanocomposite Coating on Aluminum”, S. Nayak and Narendra B. Dahotre, Journal of Minerals, Metals and Materials (JOM) Society, Vol. 54, No. 9, pp. 39-41, 2002
    161. “Variation of Structure with Input Energy During Laser Surface Engineered Ceramic Coating on Aluminum Alloys”, Puja Kadolkar and Narendra B. Dahotre, Applied Surface Science, Vol. 199, pp. 222-233, 2002.
    162. “Tungsten Laser Surface Alloying of A356 Al Alloy: Tribological Performance and Characterisation”, M.H. Staia. C. Sanchez, M.R. Cruz, A. Roman, J. Lesage, G. Mesmacque, and Narendra B. Dahotre, Surface Engineering, Vol. 18, No. 4, pp. 270-276, 2002.
    163.  “High-Density Infrared Processing of WC/Ni-11P Cermet Coatings”, P.G. Engleman, Narendra B. Dahotre, C.A. Blue, D.C. Harper, and R. Ott, Surface Engineering, Vol. 18, No. 2, pp. 113-119, 2002.
    164. “High Temperature Oxidation of Laser Surface Engineered VC Coating on H13 Die Casting Die Steel”, Narendra B. Dahotre and S. Shah, Advanced Engineering Materials, Vol. 3, No. 7, pp. 504-507, 2001.
    165. “Microstructural and Tribological Characterization of Laser Engineered VC Coating on Tool/Die Steel”, Swapnil Shah and Narendra B. Dahotre, Materials and Manufacturing Processes, Vol. 7, No. 1, pp.1-12, 2002
    166. “Elastic Modulus Pulse Electrode Deposited Composite Boride Coating Using Nanoindentation”, Arvind Agarwal, Narendra B. Dahotre, Laura Riester, and T. S. Sudarshan, Surface Engineering, Vol 17, No. 6, pp. 496-497, 2002.
    167. “Laser Surface Engineered VC Coating for Extended Die Life”, Swapnil V. Shah and Narendra B. Dahotre, J. Materials Processing Technology, No. 124, pp. 105-112, 2002.
    168. “Evaluation of Laser Surface Engineered Iron Oxide Coatings on Cast Aluminum Alloy for Wear Application”, A. Dasari, S. Nayak, R.D.K. Misra, O.O. Popoola and Narendra B. Dahotre, Materials Science and Technology, Vol. 18, pp. 1-18, 2002.
    169. “Laser Assisted Iron Oxide Coating on Cast Al Alloy for Automotive Engine Application”, Narendra B. Dahotre, S. Nayak, and Oludele O. Popoola, Journal of Minerals, Metals and Materials (JOM) Society, Vol. 53, No. 9, pp. 44-46, 2001.
    170. “Wear Resistance of a Laser Alloyed A-356 Aluminum/WC Composite”, M.H. Staia, M. Cruz, and Narendra B. Dahotre, Wear, Vol. 251, pp. 1459-1468, 2001.
    171. “Refractory Ceramic Coatings: Processes, Systems, and Wettability and Adhesion”, Narendra B. Dahotre, P. Kadolkar, and S. Shah, Surface and Interface Analysis, Vol. 31, pp. 659-672, 2001.
    172. “Mechanism of High Temperature Oxidation of Laser Surface Engineered TiC/Al Composite Coating on 6061 Al.”, Lalitha R. Katipelli and Narendra B. Dahotre, Materials Science and Technology, Vol. 17, No. 9, pp. 1061-1068, 2001.
    173. “Deformation Behavior of Laser Surface Engineered Titanium Diboride Coating Under Uniaxial Tensile Stress”, Arvind Agarwal and Narendra B. Dahotre, Journal of Advanced Materials, Vol. 33, No. 3, pp. 37-41, 2001.
    174. “Mechanical Characterization of the Interface in Laser Surface Engineered Composite Titanium Diboride Coating on Steel”, Arvind Agarwal and Narendra B. Dahotre, Surface Engineering, Vol. 17, No. 1, pp. 66-70, 2001.
    175. “Microstructural and Tribological Characterization of an A-356 Aluminum Alloy Superficially Modified by Laser Alloying”, M. H. Staia, M. Cruz, and Narendra B. Dahotre, Thin Solid Films, Vol. 377-378, No. 0, pp. 665-674, 2000.
    176. “Surface Modification and Characterization of Functional Oxide Ceramics using CO2 Laser”, M. Okutomi, H. Nomura, T. Tsukamoto, Narendra B. Dahotre, and H. Shen, Nuclear Instruments and Methods in Physics Research Section B, Vol. 169, No. 1-4, p. 6-11, 2000.
    177. “Interfacial Strength of Laser Surface Engineered TiC Cating on 6061 Al using Four-Point Bend Test”, Lalitha R. Katipelli , Arvind Agarwal and Narendra B. Dahotre, Materials Science and Engineering A, Vol. A289, No. 1-2, pp. 34-40, 2000.
    178. “Mechanical Properties of Laser Engineered Composite Boride Coating on Steel: A Nanoindentation Approach”, Arvind Agarwal and Narendra B. Dahotre, Metallurgical & Materials Transactions A, Vol. 31A, pp. 401-407, 2000.
    179. “Elevated Temperature Oxidation of Laser Engineered Composite Boride Coating on Steel”, Arvind Agarwal and Narendra B. Dahotre, Metallurgical and Materials Transactions A, Vol. 31A, pp. 461-473, 2000.
    180. “Laser Engineered Titanium Boride Coating”, Arvind Agarwal and Narendra B. Dahotre, Advanced Materials & Processes (AM&P), Vol. 156, No. 10, pp. 43-45 2000.
    181. “Comparative Wear in Titanium Diboride Coatings on Steel Using High Energy Density Processes”, Arvind Agarwal and Narendra B. Dahotre, WEAR, Vol. 240, No. 1-2, pp. 144-151, 2000.
    182. “Neural Networks in Studies on Oxidation Behavior of Laser Surface Engineered Composite Boride Coating”, Anuradha Godavarty, Arvind Agarwal, and Narendra B. Dahotre, J. of Applied Surface Science, Vol. 161, No. 1-2, pp. 129-136, 2000.
    183. “In-situ Synthesis of Intermetallic and Ceramic Coatings using Pulse Electrode Surfacing”, Arvind Agarwal and Narendra B. Dahotre, Scripta MATERIALIA, Vol. 42, No. 5, pp. 493-498, 2000.
    184. “Wear Enhancement of Aluminum by Laser Surface Alloying with Silicon”, M.H. McCay, N. Kennedy, J.H. Hopkins, and Narendra B. Dahotre, Lasers in Engineering, Vol. 10, No. 2, pp. 107-122, 2000.
    185. “Functionality of Laser Surface Engineered Composite Titanium Diboride Coating”, Arvind Agarwal and Narendra B. Dahotre, J. Minerals, Metals, and Materials (JOM-e) Society, Vol. 52, No. 1, 2000.
    186. “Laser Surface Engineered TiC Coating on 6061 Al Alloy: Microstructure and Wear”, Lalitha R. Katepelli, Arvind Agarwal and Narendra B. Dahotre, Applied Surface Science, Vol. 153, No. 2-3, p. 65, 1999.
    187. “Evaluation of Laser Surface Engineered Boride Coating in Various Accelerated Corrosion and Oxidation Environments”, Arvind Agarwal and Narendra B. Dahotre, Corrosion Prevention and Control, Vol. 46, No. 5, pp. 111-121 and 132, 1999.
    188. “The Influence of Metals and Carbides During Laser Surface Modification of Low Alloy Steel”, M.H. McCay, Narendra b. Dahotre, J.A. Hopkins, and T.D. McCay, J. Materials Science, Vol. 34, No. 23, pp. 5789-5802, 1999.
    189. “Refractory Ceramic Composite Coating via Laser Surface Engineering”, Narendra B. Dahotre and Arvind Agarwal, J. Minerals, Metals, and Materials (JOM) Society, vol. 51, No. 4, pp. 19-21, 1999.
    190. “Laser Deposited Titanium Diboride Coating for Protection of Molten Aluminum Handling Tools and Molds”, Arvind Agarwal and Narendra B. Dahotre, J. Lasers in Engineering, Vol. 9, pp. 169-193, 1999.
    191. “Pulsed Electrode Surfacing of Steel with TiC Coating: Microstructure and Wear Properties”, Arvind Agarwal and Narendra B. Dahotre, J. Mater. Eng. & Performance, Vol. 8, No. 4, pp. 479-486,1999.
    192. “Laser Surface Engineering of Steel for Hard Refractory Ceramic Composite Coating”, Arvind Agarwal and Narendra B. Dahotre, International Journal of Refractory Materials and Hard Metals, Vol. 17, pp. 283-293,1999.
    193. “Synthesis of Boride Coating on Steel using High Energy Density Processes: Comparative Study of Evolution of Microstructure”, Arvind Agarwal and Narendra B. Dahotre, Journal of Materials Characterization, Vol. 42, No.1, pp. 31-44, 1999.
    194. “Ceramic/Metal Interface in Laser Deposited Hard Refractory Composite Coating: Electron Microscopy Study”, Arvind Agarwal, Narendra B. Dahotre, and L.F. Allard, Practical Metallography, Vol. 36, No. 5, pp. 250-263, 1999.
    195. “Non-Vacuum Laser Deposition of Buffer Layers for Coated Conductors”, Narendra B. Dahotre, V. Semak, C. Xiao, and M.H. McCay, J. of Thin Solid Films, Vol. 340, pp. 77-86, 1999.
    196. “Formation of a Wear Resistant Surface on Al by Laser Aided In-situ Synthesis of MoSi2”, Kunal Ghosh, M.H. McCay, and Narendra B. Dahotre, Journal of Materials Processing Technology, Vol. 88, pp. 169-179, 1999.
    197. “Evolution of Interface in Pulsed Electrode Deposited Titanium Diboride on Copper and Steel”, Arvind Agarwal, Narendra B. Dahotre, and T.S. Sudarshan, Surface Engineering, Vol. 1, No. 1, pp. 27-32, 1999.
    198. “The Influences of Metals and Carbides During Laser Surface Modification of Low Alloy Steel”, M.H. McCay, Narendra B. Dahotre, J.A. Hopkins, T.D. McCay, and M.A. Riley, J. Mater. Sci., Vol 34, N0 23, pp. 5789-5802, 1999.
    199. “Pulse Electrode Deposition of Superhard Boride Coatings on Ferrous Alloy”, Arvind Agarwal, and Narendra B. Dahotre, Surface Coatings and Technologies, Vol. 106, Issue 2-3, pp. 242-250, 1998.
    200. “Laser Induced Reaction Coating of Ceramic on Ceramic Composite for Enhanced High Temperature Corrosion Resistance”, Narendra B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T. D. McCay, Transactions of the Metal Finishers’ Association of India, Vol.7, No.1, pp7-22, 1998.
    201. "Diffusion Bonding of Laser Surface Melted Ni-alloy Material", W.Reitz, and Narendra B. Dahotre, Materials and Manufacturing Processes, Vol.13, No.1, pp.1-14, 1998.
    202. "Structural and Hardness Studies of CNx/TiN Composite Coatings on Si(100) Substrate by Laser Ablation Method", A. Kumar, H. L. Chan, and Narendra B. Dahotre, J. Materials Engineering and Performance, Vol.6, No.5,  pp. 577-582, 1997.
    203. "Laser Ablation Synthesis and Characterization of Nitride Coatings", A. Kumar, H. L. Chan, U. Ekanayake, A. Wierzbicki, Narendra B. Dahotre, and S. C.Sikes, J. Materials Engineering and Performance, Vol.6, No.5, pp. 583-585, 1997.
    204. “Evolution of Microstructure in BaTiO3 Thin Films Recrystallised by Laser”, M.Okutomi, T. Tsukamoto, S. Niki, and Narendra B. Dahotre, Surface Engineering, Vol. 13, No. 1, pp. 66-70, 1997.
    205. "Effect of Particulate Loading on Heat and Mass Transfer during Laser Welding of Metal Matrix Composites", Mary Helen McCay, T. Dwayne McCay, Narendra B. Dahotre, and C. Michael Sharp, J. Materials Processing & Manufacturing Science, Vol.2, pp.261-272, January 1994.
    206. "Evaluation of Microstructure in BaTiO3 Thin Films Recrystallized by Laser", M.Okutomi, T. Tsukamoto, S. Niki, and Narendra B. Dahotre, Surface Engineering, Vol.13, No.1, pp. 66-70, 1997.
    207. “High Temperature Ceramic Coating of Ceramic by Laser In-Situ Reaction Technique”, Narendra B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T.D. McCay, J. Minerals, Metals and Materials (JOM) Society, Vol.47, No.10, pp.51-53, 1995.
    208. "Laser Induced Liquid Phase Reaction Synthesis Assisted Joining of Metal Matrix Composite", Narendra B. Dahotre, M.H. McCay and T. Dwayne McCay, Materials and Manufacturing Processes, Vol.9, No.3, pp.447-466, 1994.
    209. "Diamond Materials for Electromagnetic Railguns", Narendra B. Dahotre, Mary Helen McCay and T. Dwayne McCay, Materials and Manufacturing Processes, Vol.9, No.1, pp. 1-36, 1994.
    210. "Effect of Grain Structure on Phase Trans­formation Events in the Inconel 718", Narendra B. Dahotre, Mary Helen McCay, T. Dwayne McCay, Camden R. Hubbard, Wallace D. Porter and O.B. Cavin, Scripta Metallurgica et Materialia, Vol.28, No.11, pp. 1359-1364, 1993.
    211. "Laser Transfor­mation of Pb-Sb, Pb-Ca and Pb-Sb-Sn-As Alloys", Narendra B. Dahotre, M. H. McCay, T. D. McCay and M. M. Kim, J. Materials Science, Vol.27, pp. 6426-6436, 1992.
    212. "Gas Assisted Heat Transfer Effects in Laser Welding Inconel 718", M.H. McCay, T.D. McCay, Narendra B. Dahotre, and C.M. Sharp, Joining Sciences, Vol.1, No.3, pp. 145-152, 1992.
    213. "Laser Treatment of Lead‑Alloys for Battery Grid", Narendra B. Dahotre, Mary Helen McCay, T. Dwayne McCay and C. Michael Sharp, in the Industrial Laser Handbook‑1992, Eds: D. Belforte and M. Levitt, Springer‑Verlag Publication, Sturbridge, MA, pp.123-131, 1992.
    214. "Fusion Zone Structures in Laser Welded Al-SiC Composites", M. H. McCay, T. D. McCay, Narendra B. Dahotre and C. M. Sharp, J. of Laser Applications, Vol. 3, No. 3, 1991.
    215. "Pulse Laser Processing of a SiC/Al‑Alloy Metal Matrix Composite", Narendra B. Dahotre, Mary Helen McCay, T. D. McCay, S. Gopinathan and Lawrence F. Allard, Journal of Materials Research, Vol. 6, No. 3, pp. 514‑529, 1991.
    216. "Laser Surface Modification of Zinc‑Base Composites", Narendra B. Dahotre, T. Dwayne McCay and Mary Helen McCay, Journal of Metals , Vol.42, No.6, pp. 44‑47. 1990.
    217. "Development of Microstructure in Laser Surface Alloying of Steel with Chromium", Narendra B. Dahotre and K. Mukherjee, Journal of Materials Science, Vol.25, pp.445‑454, 1990.
    218. "Laser Processing of SiC/Al‑Alloy Metal Matrix Composite (MMC)", Narendra B. Dahotre, T. Dwayne McCay and Mary Helen McCay, Journal of Applied Physics, Vol.65, No.12, pp.5072‑5077, 1989.
    219. "Shear Band Formation and Cracking of a Metallic Glass Irradiated with High Energy Laser Pulses", K. Mukherjee, Narendra B. Dahotre and C. Wakade, J Materials Science, Vol.22, pp. 601‑606, 1987.
    220. "Laser Surface of W2 Tool Steel: Effects of Prior Heat Treatment", Narendra B. Dahotre, Ann Hunter and K. Mukherjee, Journal of Materials Science, Vol.22, pp.403‑406, 1987.
    221. "Damage in Aluminum, Zinc and Tin from a Nanosecond Electric Pulse Discharge", C. Wakade, Narendra B. Dahotre and K. Mukherjee, Materials Science and Engineering, Vol.164, pp. 247‑253, 1984.

    Reviewed Publications in Conference Proceedings

    1. “Laser Coating of Aluminum Alloy EN AW-6082-T651 with TiB2/TiC/Al”, Dunja Ranvikar, Narendra B. Dahotre, and Janez Grum, Proceedings of  2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, Eds. B. Smoljan and B. Matijcvic, Coartian Society for Heat Treatment and Surface Engineering, Zagreb, Croatia, pp. 113-119, 2013.
    2. “Laser Machining of Alumina: Experimental and Numerical Approach for Surface Finish”, Hitesh D.Vora, Sameer R. Paital, Sandip P. Harimkar, Sandra K.S. Boetcher, Narendra B. Dahotre, Advances in Manufacturing Technologies, Materials Science and Technology (MS&T) 2011, TMS, Warrendale, PA, pp.1493-1500, 2011.
    3. “Laser Surface Alloying of a Creep Resistant Magnesium Alloy MRI 230D with Al and Al2O3”, G. Rapheal, S. Kumar, C. Blawert, and Narendra B. Dahotre, Magnesium Technology 2010, Ed: Sean R. Agnew, Neal Neelameggham, Eric A, Nyberg, Wim H. Sillekens, TMS, 2010.
    4. “A Novel Approach of Laser Surface Dressing of Alumina Ceramic”, S.P. Harimkarand N.B. Dahotre, Proc. 1st Int. Cong. on Ceramics: A Global Roadmap, June 25-29 (2006), Toronto, Canada.
    5. “Finite Element Analysis of Laser Induced Surface Improvement of Al Alloys With Tic,” Lino Costa, William Hofmeister, Narendra Dahotre, Proceedings of the International PowderMet2006 Conference, San Diego, June 19-21, 2006.  MPIF, X, X, 2006 Advanced in PM&PM  Proceedings of the 2006 International Science, San Diego, CA (MPIF, Princeton, NJ, 2006).
    6. Laser Surface Engineering of Alumina Ceramic Compacts: An Approach of Laser Dressing, S.P. Harimkarand N.B. Dahotre, Proceedings of Materials Science and Technology-2006 (MS&T’06),October 15-19 (2006), Cincinnati, USA. pp. 239-245.
    7. “Laser Induced In-situ Synthesis of Ultrafine Carbide Composite Coating”, Anshul Singh and Narendra B. Dahotre, Surfaces and interfaces in Nanostructured Materials, Eds: S.M. Mukhopadhyay, S. Seal, Narendra B. Dahotre, A. Agarwal, J.E. Smugeresky, and N. Moody, The Metallurgical Society of AIME, Warrendale, PA, pp. 137-142, 2004
    8. “Laser Induced Carbide Coating on Steel”, Anshul Singh and Narendra B Dahotre, Heat Treat and Surface Engineering, Eds. Narendra B. Dahotre, R.J. Gaster, R.A. Hill, and Oludele Popoola, ASM International, Materials Park, OH, pp. 427-430, December 2003
    9. “Laser Dressing of alumina Grinding Wheels”, Abhijeet Khangar and Narendra B. Dahotre, Heat Treat and Surface Engineering, Eds. Narendra B. Dahotre, R.J. Gaster, R.A. Hill, and Oludele Popoola, ASM International, Materials Park, OH, pp. 423-426, December 2004.
    10. “Laser-Assisted Surface Modification of 4340 Steel with Iron Aluminum Alloys”, G. Muralidharan, P.G Engleman, C.A. Blue, V. K. Sikka, A.K Singh, A Khangar and Narendra B Dahotre, Proceedings of Materials Research Society (MRS) Symposium, Vol. 750, 2003.
    11. “Laser Induced Surface Modification in A319 Al Alloy”, S. Nayak and Narendra B. Dahotre, Materials Science Forum, Eds: T. Chandra, Jose M. Torralba, and T. Sakai, Trans Tech Publications, Switzerland, Vols. 426-432, pp. 2443-48, 2003.
    12. “Residual Stress Characterization of Particulate Reinforced Composite Coating Using X-ray Diffraction Technique”, P. B. Kadolkar, Narendra B. Dahotre, and T.R. Watkins, Surface Engineering: Coatings and Heat Treatments, Eds. O.O. Popoola, Narendra B. Dahotre, S. Midea, H. Kopech, ASM International, Materials Park, pp. 593-602, 2003.
    13. “Microstructural Characterization of laser Induced Iron Oxide-Aluminum Reaction Coating”, S. Nayak, Narendra B. Dahotre, H.M. Meyers III, and O.O. Popoola, Surface Engineering: Coatings and Heat Treatments, Eds. O.O. Popoola, Narendra B. Dahotre, S. Midea, H. Kopech,  ASM International, Materials Park, pp. 206-211, 2003.
    14. “Nanoindentation Characterization of Laser Engineered Iron Oxide Coating on A319Al”, Narendra B. Dahotre, S. Nayak, O.O. Popoola and L. Reister, Surface Engineering: Coatings and Heat Treatments, Eds. O.O. Popoola, Narendra B. Dahotre, S. Midea, H. Kopech,  ASM International, Materials Park, pp. 212-215, 2003.
    15. “Thermal Measurements During Laser Surface Engineering Using Infrared Thermography”, P. B. Kadolkar, Narendra B. Dahotre, H. Wang, and T.R. Watkins, Surface Engineering: Coatings and Heat Treatments, Eds. O.O. Popoola, Narendra B. Dahotre, S. Midea, H. Kopech, ASM International, Materials Park, pp. 229-236, 2003.
    16. “Aluminum Based Nanostructured Composite Coatings: Processing, Microstructure and Wear Behavior”, A. Agarwal, K. Rea, S. Wannaparhun, S. Seal, Narendra B. Dahotre, and T. McKechnie, Surface Engineering in Materials Science II, Eds. S. Seal, N.B. Dahotre, J.J. Moore, C. Suryanarayana, and A. Agarwal, The Metallurgical Society of AIME, Warrendale, PA, pp. 81-90, 2003.
    17. “High Temperature Oxidation of VC Coated H13 Steel”, Swapnil Shah and Narendra B. Dahotre, Elevated Temperature Coatings: Science and Technology-IV, Eds. Narendra B. Dahotre, Janet M. Hampikian and John E. Morral, The Metallurgical Society of AIME, Warrendale, PA, pp. 291-300, 2001.
    18. “Oxidation Kinetics and Morphology of Laser Surface Engineered Hard Coating on Aluminum”, Narendra B. Dahotre and Lalitha R. Katipelli, Elevated Temperature Coatings: Science and Technology-IV, Eds. Narendra B. Dahotre, Janet M. Hampikian and John E. Morral, The Metallurgical Society of AIME, Warrendale, PA, pp. 219-232, 2001.
    19. “Wear Resistance of Laser Alloyed ZrB2 Coatings on Mild Steel”, A. Gadkari, A.S. Khanna, and Narendra B. Dahotre, ASM International, Thermal Spray: Surface Engineering via Applied Research(USA), pp. 999-1004, May 2000.
    20. “Accelerated Liquid Metal Corrosion of Laser Surface Engineered VC Coatings on Structural Steel”, Swapnil Shah, Lalitha R. Katipelli, Arvind Agarwal, Narendra B. Dahotre, Surface Engineering: In Materials Science I, Eds. S. Seal, Narendra B. Dahotre, J.J. Moore, and B. Mishra, The Metallurgical Society of AIME, Warrendale, PA, p. 311-322, 2000.
    21. “Oxidation and Wear Performance of Laser Surface Engineered TiC Coating on 6061 Al”, Lalitha R. Katipelli, Arvind Agarwal, Narendra B. Dahotre, Surface Engineering: In Materials Science I, Eds. S. Seal, Narendra B. Dahotre, J.J. Moore, and B. Mishra, The Metallurgical Society of AIME, Warrendale, PA, p. 323-334, 2000.
    22. “The Effect of Chromium and CrB2 Additions on the Formation of Borides During Laser Surface Modification of Steel”, M. H. McCay, J. A. Hopkins, and Narendra B. Dahotre, Surface Engineering: In Materials Science I, Eds. S. Seal, Narendra B. Dahotre, J.J. Moore, and B.Mishra, The Metallurgical Society of AIME, Warrendale, PA, p. 385-394, 2000.
    23. “Effect of Deposition Temperature on the Physico-Chemical Behavior of Ti-Al-N Thin Films”, S. Seal, A. Kale, V. Desai, D. Jimenez, K. Sundaram, Narendra B. Dahotre, and S. Shah, Surface Engineering: In Materials Science I, Eds. S. Seal, Narendra B. Dahotre, J.J. Moore, and B. Mishra, The Metallurgical Society of AIME, Warrendale, PA, pp. 403-413, 2000.
    24. “Characterization and Tribological behavior of Composite Boride Coating Deposited on Steel using Laser Surface Engineering”, Arvind Agarwal and Narendra B. Dahotre, Elevated Temperature Coatings: Science and Technology-III, Eds. J. Hampikian and Narendra B. Dahotre, The Metallurgical Society of AIME, Warrendale, PA, pp. 273-284, 1999.
    25. “Laser Surface Alloying of Aluminum with Refractory Materials”, Narendra B. Dahotre, L.P. Efimenko, and I.G. Poljakova, Heat Resistant Functional Coatings, St. Petersburg, Russia, Vol. 1, pp.135-143, 1997.
    26. “Characterization of Titanium Diboride Coating Deposited on Metals Using Pulse Electrode Surfacing (PES) Technique”, Arvind Agarwal, Narendra B. Dahotre, T.S. Sudarshan, Proc. Surface Modification Technologies XI, Eds: T.S. Sudarshan, M. Jeandin, and K.A. Khor,  Inst. Materials, London, UK, 1997
    27. ”Evolution of Microstructure and Mechanical Properties in Laser Induced Reaction Coating of Al2O3 in SiC/ Al2O3 Composite”, Narendra B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T.D. McCay, in Elevated Temperature Coatings: Science and Technology-II, Eds. Narendra B. Dahotre and J. Hampikian, The Metallurgical Society of AIME, Warrendale, PA, pp. 441-452, 1996.
    28. "Laser Induced Surface Modification of Ceramic Coated Ceramic Composite for High Temperature Corrosion Protection", Narendra B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T.D. McCay, in Elevated Temperature Coatings: Science and Technology-I, Eds. N.B. Dahotre, J. Hampikian and J.J. Stiglich, The Metallurgical Society of AIME, Warrendale, PA, pp. 113-123, 1995.
    29. "Laser Induced Reaction Coatings of Ceramics", Narendra B. Dahotre, C. Xiao, W. Boss, M.H. McCay, and T.D. McCay, in Surface Modification Technologies VIII, Eds. T.S. Sudarshan and M. Jeandin, The Institute of Materials, London, UK, pp. 310-319, 1995.
    30. "Evaluation of a Candidate Material for a Coal-Fired Magnetohydrodynamic (MHD) High Temperature Recuperative Air Heater", J. Winkler, Narendra B. Dahotre and W. Boss, Proceedings of 17th Annual Conference on Composites and Advanced Ceramics, Eds: D. C. Cranmer and J. Buckley, American Ceramic Society, Westerville, Oh, 1993.
    31. "Laser Joining of Metal Matrix Composites", Narendra B. Dahotre, M. H. McCay, T. D. McCay, S. Gopinathan and C. M. Sharp, in Machining of Composite Materials, Eds: T. S. Srivatsan and D. Bowden, ASM International, Metals Park, Ohio, 1992.
    32. "Effect of Pulse Duty Cycle on Laser Welding of Inconel 718," M. H. McCay, T. D. McCay, Narendra B. Dahotre, C. M. Sharp, A. Sedghinasab and S. Gopinathan, in The Use of Lasers in Manufactur­ing, SP‑794, (1989) 57‑65 Proceeding of SAE Conf. on Advanced Manufac­turing Techniques, Anaheim, California, Sept. 1989.
    33. "Micromechanism of High Speed Abrasive Waterjet Cutting of Cast Metal Matrix Composites", P. K. Rohatgi, Narendra B. Dahotre, S. G. Gopinathan, D. Alberts and K. F. Neusen, in Proceedings of International Symp. on Advances In Cast Reinforced Metal Compos­ites,  Eds: S. G. Fishman and A. K. Dhingra, ASM International, pp. 391‑397, 1988.
    34. "Wear Behavior of Flake Graphite and Microcrystalline Carbon Dispersed Al‑Matrix Composites", P.K. Rohatgi, Narendra  B. Dahotre, Y. Liu and T.L. Barr, in Proc. Intl. Conf. on Engineered Materials for Advanced Friction and Wear Applications, , Eds: F. A. Smidt and P. J. Blau, ASM International, Materials park, Ohio, pp. 85‑92, 1988.
    35. "Wear Behav­ior of Al and Al‑Si‑Cu Alloys", P. K. Rohatgi, Narendra B. Dahotre, Y Liu and T. L. Barr, in Proceedings of Conf. on Wear Resistance of Metals and Alloys, Ed: G. R. Kingsbury, ASM International, pp. 47‑57, 1988. 
    36. “Behavior of Al Alloy‑Graphite and Al Alloy‑Microcrystalline Carbon Particle Composites", P. K. Rohatgi, Narendra B. Dahotre, Y. Liu, M. Lin and T. L. Barr in Proceedings of Conf. on Cast Reinforced Metal Composites, Eds: S. G. Fishman and A. K. Dhingra, ASM International, pp. 367‑373, 1988.

    Publications in Conference Proceedings

    1. ”Laser Surface Engineered Hard Coating on Aluminum”, Lalitha R. Katipelli and Narendra B. Dahotre, New Materials & Development Processes, Ed. David Roessler, Global Powertrain Congress, Ltd., Detroit, MI, pp. 42-53, 2000.
    2. "Laser Induced Reaction Bonding of High Temperature Structural Ceramics", Narendra B. Dahotre, M.H. McCay and T. Dwayne McCay, in the Proceedings of International Congress on Applications of Lasers and Electro-Optics (ICALEO'94), Laser Institute of America, Orlando, FL, pp.105-15, 1995.
    3. "Carbide Formation During Laser Welding of SiC/Aluminum Composites", S. Gopinathan, Narendra B. Dahotre, Mary Helen McCay and T. Dwayne McCay, Laser Materials Processing, Proceedings of ICALEO'93, Orlando, FL, LIA Volume 73, 1993.
    4. "Laser Induced Reaction Joining of Metal Matrix Composite", Narendra B. Dahotre, T. Dwayne McCay and Mary Helen McCay, Laser Materials Processing, Proceedings of ICALEO'93, Orlando, FL, LIA Volume 73, 1993.
    5. "Laser Welding Techniques for Alloy 718", M. H. McCay, T. D. McCay, C. M. Sharp and Narendra B. Dahotre, Superalloys 718, 625 and Various Derivatives, Ed. E. A. Loria, The Minerals, Metals and Society, Warrendale, PA, pp. 719‑734, 1991.
    6. "An Evaluation of Strength of Pulsed Laser Welded SiC Particulates Reinforced Al‑Alloy Metal Matrix Composite", Narendra B. Dahotre, Santosh Gopinathan, Mary H. McCay, T. Dwayne McCay and C. Michael Sharp, in Light Weight Alloys for Aerospace Applications II, Eds: E. W. Lee and N. J. Kim, The Metallurgical Society of AIME, Warrendale, PA, pp. 313‑326, 1991. 
    7. "Laser Welding of a SiC/Al‑alloy Metal Matrix Composite", Narendra B. Dahotre, M. H. McCay, T. D. McCay, C. M. Sharp, S. Gopinathan and L. F. Allard, Laser Materials Processing, Proceedings of ICALEO'91, Orlando, LIA Volume 71, pp. 343‑356, 1991.
    8. "The Effect of Laser Pulse Tailored Welding on Inconel 718", M. H. McCay, C. M. Sharp, M. G. Womack, T. D. McCay and Narendra B. Dahotre, Laser Materials Processing, Proceedings of ICALEO'91, Volume 71, Orlando, FL, pp. 325‑342, 1991.
    9. "Gas Assisted Heat Transfer Effects in Laser Welding Inconel 718", M. H. McCay, T. D. McCay, C. M. Sharp and Narendra B. Dahotre, Proceedings of XXII Interna­tional Conference on Heat and Mass Transfer, Dubrovnik, Yugoslavia, August 1990.
    10. "Laser Pulse Welding of Inconel 718", M. H. McCay, T. D. McCay, Narendra B. Dahotre, C. M. Sharp, A. Sedghinasab and S. Gopinathan, Laser Processing, Proceedings of ICALEO, Orlando, FL, LIA Volume 69, p.229, Oct. 1989.
    11. "Laser Surface Melting and Alloying of Steel with Chromium", Narendra B. Dahotre and K. Mukherjee, in Laser Materials Processing III, Eds: K. Mukherjee and J. Mazumder, The Metallurgical Society of AIME, Warrendale, PA, 1989.
    12. "Some Aspects of the Micro­structure, Defects and Diffusion in Laser Surface Alloying of Steel", Narendra B. Dahotre, F. Fink and K. Mukherjee, in SPIE Vol. 668, Laser Processing: Fundamen­tals, Applications Systems Engineering, the Society of Photo‑Optical Instrumentation Engineers, Bellingham, WA 98227, pp.134‑144, 1986.
    13. "Pulse Laser Induced Shear Band Formation In Metallic Glass", K. Mukherjee, C. Wakade and Narendra B. Dahotre, in Laser Processing of Materials Eds: K. Mukherjee and J. Mazumder, The Metallurgical Society AIME, Warrendale, PA, pp.141‑158. 1985.
    14. "Laser Melting and Micro­structure of Metallic Glass", Narendra B. Dahotre, C. Wakade and K. Mukherjee, in Laser Processing of Materials, Eds: K. Mukherjee and J. Mazumder, The Metallurgical Society of AIME, Warrendale, PA, pp.101‑115, 1985.
  • Professional Experience
    • May 2013-Present, University Distinguished Research Professor, University of North Texas
    • January 2010-December 2013, Chairman and Professor, Department of Materials Science and Engineering, University of North Texas.
    • August 2014-Present (courtesy appointment), Professor of Biomedical Engineering, University of North Texas
    • February 2011-Present (courtesy appointment), Professor of Mechanical and Energy Engineering, University of North Texas
    • August 1999-December 2009, Professor of Materials Science and Engineering, University of Tennessee.
    • August 2002-August 2009, UT-ORNL Professor of Materials Science and Engineering, University of Tennessee. Joint faculty appointment with University of Tennessee and Oak Ridge National Laboratory.
    • July 2002 – June 2003: Vice-Chairman, Center for Laser Applications, a Center of Excellence, the University of Tennessee System
    • July 2001 – June 2002: Chairman, Center for Laser Applications, a Center of Excellence of the University of Tennessee System
    • December 1999 - 2005: Member of the Governing Council for Center for Laser Applications, a Center of Excellence of the University of Tennessee System.
    • August 1997- January 1999: Associate Professor of Materials Science and Engineering, The University of Tennessee, Space Institute.
    • September 1988 - August 1997: Research Assistant Professor of Materials Science and Engineering, The University of Tennessee, Space Institute.
    • August 1987 - August 1988: Post-Doctoral Fellow and Instructor, Materials Department, University of Wisconsin-Milwaukee (UWM).
    • January 1981 - June 1986: Graduate Teaching Assistant, Department of Metallurgy Mechanics and Materials Science, Michigan State University. Involved in teaching laboratory exercises in following subjects.
    • September 1983 - June 1987: Graduate Research Assistant, Division of Engineering Research, Michigan State University.
  • Patents

    Patents Pending

    • “Laser Assisted Machining (LAM) of Hard Tissues/Bones”, Narendra B. Dahotre and S. Santhanakrishnan, application filed to U.S. PTO, March 15, 2014.

    Patents (Jointly holds the following 15 U.S. Patents)

    • Method for Gas Assisted Energy Beam Engraving of a Target Object”, US Patent 6,660,962, December 9, 2003.
    • Method for Marking Steel and Aluminum Alloys”, US Patent 6,497,985, December 24, 2002.
    • “Method for Producing Decorative Appearing Bumper Surfaces” US Patent 6423162B1 July 23 2002.
    • “Method for Practicing a Feedback Controlled Laser Induced Surface Modification”, US Patent 6,350,326 B1, February 26, 2002
    • “Method for Increasing the Wear Resistance in an Engine Cylinder Bore and Improved Automotive Engine”, US Patent 6,628,026 B1, December 11, 2001.
    • “Method for Increasing the Wear Resistance in an Aluminum Cylinder Bore”, US Patent 6,299,707, October 9, 2001.
    • “Method for Improving the Wear and Corrosion Resistance of Material Transport Trailer Surfaces”, US Patent 6,294,225 B1, September 25, 2001.
    • “Method for Producing Alloyed Bands or Strips on Piston for Internal Combustion Engines”, US Patent 6,284,067 B1, September 4, 2001.
    • “Method for Laser/Plasma Surface Alloying”, US Patent 6,229, 11 B1, May 8, 2001.
    • “Method for Marking, Tracking, and Managing Hospital Instruments”, US Patent 6,223,137 B1, April 24, 2001.
    • “Method for Joining Dissimilar Metals or Alloys”, US Patent 6,173,886 B1, January 16, 2001.
    • “Apparatus and Method for Producing An Improved Laser Beam” US Patent 6,016,227 January 18, 2000.
    • "Method for Laser Induced Improvement of Surfaces", US Patent 5,985,056, Nov. 16, 1999.
    • "Apparatus for Laser Alloying Induced Improvement of Surfaces", US Patent 5,961,861, Oct. 5, 1999.
    • "Laser Bonding Process for Ceramic Articles", US Patent 5,503,703; April 2, 1996.
  • Honors and Awards
    • 2016 University of North Texas Foundation Faculty Leadership Award.
    • 2013 The Metallurgical and Materials Society (TMS) – Materials Pocessing and Manufacturing Division (MPMD) Distinguished Engineer/Scientist Award.
    • Visiting Professor, Northwestern Polytechnical University, Xi'an, Shaanxi, P.R. China, 2016.
    • Adjunct Professor, Curtin University, Perth, Australia, 2015.
    • Endowed Professor Brahm Prakash Visiting Chair, Department of Materials Engineering, Indian Institute of Science, Bangalore, India, 2013.
    • Honorary Guest Professor, Shandong University, Jinan, P.R. China, 2012-2015. 4
    • Honorary Advisor of Research, Narayana Medical College and Hospital and Narayana Institutions, Nellore, India, July 2012-Present.
    • Fellow of the following organizations:
      • American Institute of Medical and Biological Engineering (AIMBE) (2016)
      • World Innovation Foundation (WIF) (2014). National Academy of Inventors (NAI) (2013).
      • Materials Research Society-India (MRSI) (2011).
      • Society of Manufacturing Engineers (SME) (2010).
      • American Association of Advancement of Science (AAAS) (2009).
      • Indian Institute of Metals (IIM) (2009).
      • American Society of Mechanical Engineers (ASME) (2008).
      • American Society for Materials (ASM) International (2004).
    • 2008 Faculty Award for Excellence in Service, Department of Materials Science and Engineering, The University of Tennessee.
    • The University of Tennessee Chancellor’s 2006 Research and Creativity Achievement Award
    • The University of Tennessee College of Engineering 2006 Research Fellow Award
    • University of Tennessee Vice President's Award for Research Excellence, 1997. Cited for research work in the area of Laser Induced Reaction Processing of Advanced Materials.
    • American HONDA Motor Company R&D Research Award, 2000-2001.
    • 2000 ASM-IIM (American Society for Materials International – Indian Institute of Metal) Visiting Lecturer Award, April 26, 2000, to present an invited technical talks at the ASM chapters in India.
    • American HONDA Motor Company R&D Research Award, 1998-99.  Ford Foundation Research Award, 1998-99.
    • ALCOA Foundation Research Award, 1997-98.
    • 1998 American Museum of Science and Energy (AMSE’98) Award, Department of Energy, Oak Ridge, TN. Cited for Technological Achievement: Laser Induced Surface Improvement.
    • Visiting Senior Research Fellow in Photon Process Section of Optoelectronic Division at the Electrotechnical Laboratory, Tsukuba, Japan under the Agency of Industrial Science and Technology Fellowship Program of Japanese Ministry of International Trade and Industry. The topic of research: Laser Processing of Coatings for Space Applications, 1996.
    • 2000 Outstanding Alumni, College of Engineering, University of Poona, Pune India. Cited for the work in Laser Materials Processing.
    • Honorary Technical Consultant to Asean Tribology Center, Manila, Philippines, February 1996-Todate.
    • Member of the Board of Technical Advisors, Center for Laser Processing of Materials, NFTDC, Department of Science & Technology, Government of India, Hyderabad, India, February 1997-Todate.
    • 2010 Best Poster (First Place) in Graduate Division Poster Contest, Biological Materials Science TMS Annual meeting, Seattle, Washington, Feb. 2010
    • 2008 2 nd Best Poster, Student Poster Night, ASM International Oak Ridge Chapter.
    • 2007 2nd Best Poster, Student Poster Night, ASM International Oak Ridge Chapter. 5
    • 2006 R&D 100 Award, Metal Infusion Surface Treatment (MIST), Jointly with a team from ORNL and industrial partners
    • 1st place in the 2005 The Mineral, Metals and Materials Society (TMS) Outstanding Paper Contest, Graduate Division.
    • 2 nd place in the 2003 The Mineral, Metals and Materials Society (TMS) Outstanding Paper Contest, Graduate Division.